2011 Rover 414i P0711 Fault Code Check

When you check 2011 Rover 414i car engine light came on code P0711 the reason should be Engine Light ON (or Service Engine Soon Warning Light). However Rover manufacturer may have a different definition for the P0711 OBD-II Diagnostic Powertrain (P) Trouble Code. So you should chech it on our car models.

On 1999 and later P0711 2011 2011 Rover 414i engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.

2011 Rover 414i P0711 OBD-II Diagnostic Powertrain (P) Trouble Code Description 2011 Rover 414i car P0711 OBD-II Trouble Code The Automatic Transmission (A/T) fluid temperature sensor detects the A/T fluid temperature and sends a signal to the Transmission Control Module (TCM). Reason For 2011 Rover 414i P0711 Code The reason of 2011 Rover 414i P0711 OBD-II Fault Code Check is P0711 Transmission Fluid Temperature Sensor Circuit Range/Performance.

2011 Rover 414i P0711 Possibble Fix Ways :

A failing oil pump can cause what's called oil starvation, which is almost always fatal to any engine. Overhead cam engines are especially at risk, because the cam and valve train are farther from the pump than they are in pushrod engines. Oil should be of a proper viscosity, which means it needs to be light enough to move quickly.

If your vehicle failed a P0711 2011 2011 Rover 414i test and the P0711 Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses P0711 a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look P0711 2011 2011 Rover 414i: Any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression.

What does fault code P0711 mean for 2011 Rover 414i ? What does a diagnostic reading P0711 mean for 2011 Rover 414i ? How to fix OBD2 Code P0711 for 2011 Rover 414i ? What do we know about P0711 code for 2011 Rover 414i ?